Start
at opposite corners. Insert corner poles in each corner pole
tent hole and raise so that the bottom of poles slant toward center
of tent. Adjust the corner guide ropes to hold poles in
position. Continue with the other two corners and then sides.
2. Raise Center Pole
Assemble
three piece center pole and insert into center pole hole.
Raise to upright position and tie off jump rope to pole.
3. Side Pole Adjustment
Tighten
guide ropes and then set side poles to upright position.
Adjust pole positions and guide rope tension to properly pull out
tent. Protective stake top covers are recommended for all
stakes.
4. Important
Check
guide ropes periodically for tightness and maintaining good
condition. Stakes provided are for average soil conditions.
Sandy soil or asphalt may require additional staking. Proper
installation suitable for site condition is the responsibility of
the installer. Store tent in a cool dry area. Never
store when wet or damp.
5. Take Down
Loosen
all guide ropes. Spread drop cloths so tent does not lie on
dirt or grass. It is preferred to take down tent when it is
dry. Reverse steps 1 through 3 for disassembly.
